Modifying Profile for SPIROU

This article applies to:	Product	Version
	Tmedia	2.8, 2.9, 2.10, 3.0, 3.2

Note
This articles assumes that SS7 ISUP is configured. 
In addition, if you want to validate the SPIROU configuration, you must repeat these steps for all of the profiles in your current configuration.

1- Select Profiles from the navigation panel

2- Select the profile you wish to configure

3- Expand the SIP section and set the following parameter check boxes:

Forward SS7 suspend/resume must be checked
Forward SS7 CPG hold/retrieval must be checked
Forward SIP hold type must be set to SS7 Suspend/Resume or SS7 Remote Hold/Retrieval
Max Forwards header handling must be set to Decrement and forward

4- Expand the SS7 section and set the following parameter check boxes:

Forward call suspend/resume must be checked
Forward call CPG hold/retrieval must be checked
Hop Counter IE handling must be set to Decrement and forward

5- Expand the SS7 or ISDN section and set the following parameter checkboxes:

Information transfer capability must be set to Relay
Click Save

6- Verify that the "Profile was successfully updated" message is displayed

List of Parameters