Creating an MTP3 Route

This article applies to:	Product	Version
	Tmedia	2.9, 2.10, 3.0, 3.2

MTP3 routes are designed to route traffic from previously created point codes using linksets.

You require one route for each point code in your system. This means one route per DPC (SSP and STP) and one route per source point code (OPC).

To create an MTP3 route:

1- Click MTP3 in the navigation panel.

2- Select an MTP3 network.

3- Click Create New Mtp3 Route in the MTP3 network configuration window:

4- Configure the new MTP3 route:

Enter a name for the route
Select a point code for the route
Select a point type

Click Create

Note

Check the Route to Adjacent box, if this route is directed to an adjacent network

5- Verify that the "Mtp3Route was successfully created" message appears

6- Associate the newly created route with a linkset:

Select a linkset from the list of Available linksets
Click the "<<" button to associate the linkset with the newly created route

BEFORE

AFTER

Path

/configurations/@[configuration_name]/mtp3_stacks/@[mtp3_name]/mtp3_networks/@[mtp3_network]/mtp3_routes/@[mtp3_route]

Parameters (text)

/configurations/@[configuration_name]/mtp3_stacks/@[mtp3_name]/mtp3_networks/@[mtp3_network]/mtp3_routes/@[mtp3_route]
mtp3_linksets       = [ "@[mtp3_linkset]" ]
name                = "@[mtp3_route]"
point_code          = "@[point_code]"
point_code_type     = "SP"

/configurations/tb_academy_demo_config/mtp3_stacks/mtp3_config/mtp3_networks/mtp3_international/mtp3_routes/@[mtp3_route]/advanced_parameters
broadcast                     = false
route_to_adjacent             = false
sls_range                     = "ITU"
sls_selector_bit1             = true
sls_selector_bit2             = false
sls_selector_bit3             = false
sls_selector_bit4             = false
support_multi_message_prio    = false
support_route_congestion_test = true

/configurations/tb_academy_demo_config/mtp3_stacks/mtp3_config/mtp3_networks/mtp3_international/mtp3_routes/@[mtp3_route]/timers
t6_timer  = "800 milliseconds"
t8_timer  = "800 milliseconds"
t10_timer = "30 seconds"
t11_timer = "30 seconds"
t18_timer = 11000
t19_timer = "67 seconds"
t21_timer = "63 seconds"
t25_timer = "30 seconds"
tc_timer  = "500 milliseconds"

Parameters (json)

{
  "advanced_parameters" : {
    "broadcast" : false,
    "route_to_adjacent" : false,
    "sls_range" : "ITU",
    "sls_selector_bit1" : true,
    "sls_selector_bit2" : false,
    "sls_selector_bit3" : false,
    "sls_selector_bit4" : false,
    "support_multi_message_prio" : false,
    "support_route_congestion_test" : true
  },
  "mtp3_linksets" : [
    "@[mtp3_linkset]"
  ],
  "name" : "@[mtp3_route]",
  "point_code" : "@[point_code]",
  "point_code_type" : "SP",
  "timers" : {
    "t6_timer" : "800 milliseconds",
    "t8_timer" : "800 milliseconds",
    "t10_timer" : "30 seconds",
    "t11_timer" : "30 seconds",
    "t18_timer" : 11000,
    "t19_timer" : "67 seconds",
    "t21_timer" : "63 seconds",
    "t25_timer" : "30 seconds",
    "tc_timer" : "500 milliseconds"
  }
}

List of Parameters