Creating an MTP3 Linkset

This article applies to:	Product	Version
	Tmedia	2.9, 2.10, 3.0, 3.2

Once you have created an MTP3 network, you define linksets to logically combine multiple MTP3 links that connect to the same DPC. For example, one linkset could be the links between a point code identifying a Tmedia/Tdev SS7 node and a point code identifying the adjacent SS7 equipment.

To create an MTP3 linkset:

1- Click MTP3 in the navigation panel.

2- Select an MTP3 network.

3- Click Create New Mtp3 Linkset

4- Configure the new linkset:

Enter a name for the linkset
Select an origin point code (OPC)
Select an adjacent point code
Make sure the desired state is set to Active
Click Create

5- Verify that the "Mtp3Linkset was successfully created" message appears

Path

/configurations/@[configuration_name]/mtp3_stacks/@[mtp3_name]/mtp3_networks/@[mtp3_network]/mtp3_linksets/@[mtp3_linkset]

Parameters (text)

/configurations/@[configuration_name]/mtp3_stacks/@[mtp3_name]/mtp3_networks/@[mtp3_network]/mtp3_linksets/@[mtp3_linkset]
adjacent_point_code = "@[point_code]"
name                = "@[mtp3_linkset]"
origin_point_code   = "@[point_code]"

/configurations/@[configuration_name]/mtp3_stacks/@[mtp3_name]/mtp3_networks/@[mtp3_network]/mtp3_linksets/@[mtp3_linkset]/state
active = true

Parameters (json)

{
  "adjacent_point_code" : "@[point_code]",
  "name" : "@[mtp3_linkset]",
  "origin_point_code" : "@[point_code]",
  "state" : {
    "active" : true
  }
}

List of Parameters

Live states

Desired State