Actions

ProSBC:Cisco UCM 12 with ProSBC


Introduction

This Configuration Note describes how to set up Telcobridges ProSBC for interworking with Cisco Unified Telecommunications Manager 12.


Prerequisites

  • ProSBC devices must be installed as described in their respective with release 3.0.x/3.1.x. Release 3.0.x is not supported for TCP connections installation guides.
  • Cisco Unified Communications Manager 12. For additional information on Cisco UCM, visit Cisco Support.

Example Environments for SIP Trunking with Cisco UCM

Cisco ucm.png

Example Configuration

Step by step example SIP Trunk configuration.

Troubleshooting

Call Trace Test Call TBReport Advanced Troubleshooting of ProSBC